Hager Manual Flush Bolt
An Authorized Dealer for Hager Co.
$ 36.15
Flush bolts are typically used on a pair of double doors in commercial applications. They are installed into the lock stile on the inactive leaf. Consisting of two bolts, one is installed at the top and one at the bottom of the door. Life safety and building codes may limit the type of flush bolts you can use.
- Sold and priced in increments of 2
- 3-hour fire rating for metal doors up to 4 feet wide by 10 feet tall
- For use on hollow metal/fire rated doors
- 282R optional rod length available: 18" (457 mm) , 25" (635 mm), and 30" (762 mm) for a nominal charge. Bolt head, if required, may be ordered separately as part number 282P.
- Non-handed
- Bolt head rods are adjustable
- Certifications: Meets ANSI 156.16 for L04251
- Face Plate: 1'' x 6-3/4'' (25 mm x 172 mm)
- Flattened Round Bolt Head: 1/2" (13 mm) square
- Bolt Throw: 3/4" (19 mm)
- Standard Rod Length: 2" (305 mm) (from center of face to corner of door)
- Bolt Backset: 3/4" (19 mm)
- Guide Plate: 1" x 2" (25 mm x 51 mm)
- Mortise strike: 15/16'' x 2-1/4'' (24 mm x 57 mm)
- Optional Rod Length: 18" (457 mm). 24" (610 mm). 30" (762 mm). Specify 282R
- Materials: Brass faceplate with steel components
- Fasteners: Eight (8) #8 x 3/4" combo screws
- Eight (8) #8 x 1-1/2" combo screws
- Specification Sheet: Download File
- Installation Instructions: Download File