PRE-FINISHED REDIFRAMES

RediFrame is designed to sleeve the wall, becoming an integral part of the wall system. In comparative impact testing, 18-gauge RediFrame withstood 850 impacts, this is over 500 more than drywall hollow metal. The difference is the Dunbarton anchoring system. Not only does RediFrame sleeve the wall, but it anchors to the wall using at least 30 fasteners through the face of the frame opening. Hollow metal anchors to the wall from the frame throat using only 6 to 8 anchors per opening that hold the frame away from the inherent strength of the wall.

SPECIFICATIONS

• MATERIAL:
• 16 gauge, 18 gauge (standard), and 20 gauge cold-rolled steel per ASTM A1008M-16 steel or A40 Galvaneal
  
  
• DOOR THICKNESS:
  For use with 1-3/8″ or 1-3/4” thickness doors (steel or wood).
  
  
• WALL SIZE:
  2-5/8″ to 13″ fire rated, up to 15″ non-fire rated
  
  
• STOP HEIGHT:
  5/8″
  
  
• STOP WIDTH:
• See Stop Width/Threshold Notching Guide
  
  
• HINGE REINFORCEMENTS:
  Prepared with three 3-1/2″, 4″, 4-1/2″ standard weight 14 gauge hinge reinforcements or 10 gauge or 4-1/2″ and  5″ heavyweight hinge reinforcements – see complete list on hinge prep tab
  
  
• STRIKE PREP:
  Prepared with 12 gauge 2-3/4″ T-Strike Prep Standard – see a complete list of options on strike reinforcement prep tab
  
  
• FINISHING:
  Prefinished in eight standard colors. See the complete list on the Colors tab.
  
  
• FIRE RATING:
  Embossed 90 minutes neutral and positive pressure fire label; wood or stud steel wall constructions. See Fire Testing Tab.